Project Description

Make Enquiry

2K Solvent free epoxy based floor coating

Product Description

D+ PREPO is a two component, 100% solids epoxy coating. It is formulated for hard wearing, abrasion resistant, chemical resistant floor with improved cleanability. A Non-slip surface can be produced by incorporation of aggregates between the coats.


  • 100% Solids
  • Seamless and hygienic finish, no crevices where dirt and bacteria can dwell.
  • Gloss finish permits easy cleaning and low maintenance.
  • Protects against moisture penetration.
  • Excellent bond strength assures good adhesion.
  • Non-Slip finish can be tailored to requirements.
  • Excellent bonding to many different substrates.

D+ PREPO is a general service coating designed for use, whenever high solids, corrosion resistant, gloss coating is required. It is used to provide a light to medium duty, easy to clean, Chemical resistant floor coating. Some application areas of D+ PREPO are:

  • Workshops
  • Pharmaceutical plants
  • Showrooms
  • Packaging areas
  • Warehousing areas
  • Car Park Decks
  • Engineering industry
  • Automobile industry


  • Pot Life @ 25°C : 30 mins
  • Application : Brush/Roller
  • Drying Time :
  • Surface Dry 4-6 hours
  • Hard Dry Overnight
  • Intercoat intervals : 12 hours
  • Hardness, Shore D : 75-80
  • Recommended no. of coats : 2 minimum
  • DFT Recommended : 200-250 microns/ kg per coat depending on porosity
  • Mixing Ratio As supplied.
  • Pack size Pre weighed kits