D+ Epoxy Tile Grout

Project Description

D+ Epoxy Grout
Make Enquiry

Construction chemical

D+ Epoxy Tile Grout

D+ EPOXY TILE GROUT is a state of GROUTING material of highest quality that provides aesthetic effect and durability. It perfectly prevents stains, spillage, chemical attack in filled groove thicknesses of tiles, stones. D+ EPOXY TILE GROUT is thixotropic two part epoxy based formulation having excellent resistance to wear and European choice special sheen affect which makes it a darling choice of consultant fraternity. Part A consists of a mixture of epoxy resin, siliceous aggregates and additives. Part B consists of mixture of organic catalysts. The advantage of two part epoxy grout system of D+ EPOXY TILE GROUT is its high user friendliness i.e. the filling of this GEL filler in the grout is easier than all the distantly following equivalent products. It has a matt finish with an ingredient that provides crystalline sheen affect with ease of clean ability. It is suited for residential and commercial installations including those with total hygiene control, damp and wet environments.
Areas of Application :
Suitable for resistant installation and grouting of floor and wall tiles and mosaic in interiors and exteriors with grout joints between 2 to 15 mm wide, such as :

  • Floor and wall tiles in general
  • Floor and wall tiles in bathrooms and showers
  • Under floor heating
  • Kitchen counter tops
  • Terraces and balconies
  • Dairy & Food Processing Plant

D+ EPOXY TILE GROUT can be used for the grouting of ceramic tiles in environments submitted to direct contact with foods, like workbench of meats, dairy products of floor, basin for fish breeding, workbench in restaurant and bakeries.
Suitable for applications where surfaces are exposed to aggressive chemical substances such as dairies, laboratories, pubs, food factories in general. Also recommended for grouting swimming pools and tanks containing thermal or brackish water.
Suitable Substrates :

  • Concrete
  • Brick Masonry
  • Concrete Masonry
  • Cement Mortar Beds
  • Gypsum Wallboard
  • Ceramic Tile And Stones
  • Exterior Glue Plywood

Colors Available : As per shade card
Packaging : 1 kg / 5 kg
Technical Specification

  • Appearance Part A : Thick Colored
  • Part B : Soft
  • Shelf Life 24 month in the original packaging in Dry Place
  • Mixing Ratio Part A : 2 Parts by Weight
  • Part B : 1 Parts by Weight
  • The two parts are pre-batched in their
  • respective containers.
  • Mix Consistency Creamy
  • Specific Gravity of Mix 1.55 kg / l
  • Pot Life About 45 minutes at T= +23° C
  • Permitted Application Temperatures From + 12° C to +30° C
  • Recommended Application Temperatures From +18° C to +23° C
  • Walk on Time 24 hours at T= 23° C
  • Ready for Use 5 Days at T=23° C
  • Joint Width From 2 to 15 mm

COMPARISON OF GROUT

D+ Grout Other Grout
D+ Grout is a two component system consisting of resin and hardener . They have a three component system consisting of resin hardener and filler
The system is pigment based. The system is filler based.
No variation in color during/after application due to pigment May cause variation in color during /after application due to filler.
Doesn’t cause irritation while mixing May cause irritation while mixing.

COMPARISON OF OUR PRODUCTS

D+ Grout Other Grout
We have a wide range of color which include sparkle colors and different shades too. May not have wide color range.
We provide applicators for material application on field along with the raw material. Doesn’t provide applicators
Packaging material is scientifically tested and approved. No proof of packaging material.
Easy application and usage. May not have easy application.