D+ Delastic PU

D+ Delastic PU is a two component high performance polyurethane ceramic tile and stone adhesive for laying ceramic coverings and natural stones on difficult and also vibrating substrates like metal, PVC and boards coated with plastic materials. It is a solvent less system which makes it ecofriendly . For interior and exterior use.
Typical Use :

• Ceramic coverings
• Fully vitrified tiles
• Stoneware tiles
• Split clinker flags and floor quarry
• Clinker one-quarter bricks
• Glass and porcelain mosaic
• Ceramic tiles on substrates, where Stress can occur
• Natural and artificial stones, sensitive to discoloration and deformable
• As waterproofing membrane in normal loaded wet areas

Product Features :
It is a two-component, solvent and water free adhesives which are flexible and waterproof. They are made up of a polyurethane base (component A) and a special hardener (component B). On mixing the two components together, the result is a paste with the following properties:

• Good workability
• Water-proof
• Long open time
• High tensile, compression and shear strength
• Safe application and multi-purpose use
• Hardening without shrinkage
• Excellent durability and resistant to ageing
• High deformability
• Hard elastic
• Contains no plasticizer

Suitable Substrates :

• Concrete
• Cement mortar beds
• Plywood
• Gypsum wall board
• Calcium silicate board
• Bison panel board
• Concrete masonry
• Cement plaster
• AAC Block masonry
• Cement terrazzo
• Existing ceramic tile
• Other resilient tile and stone
• Plastic laminated boards
• Steel and other metals (free of rust and grease)
• Wooden-cement-boards
• Old PVC-coverings

Material Consumption:
With 4 mm notched trowel : approx. 2.0 kg/m2
With 6 mm notched trowel : approx. 3.0 kg/m2
With 8 mm notched trowel : approx. 5.0 kg/m2
Mixing and Applying :
D Delastic PU is supplied in ready-to-mix buckets:
Component A: 100 parts by weight
Component B: 20 parts by weight
Packaging : D Delastic PU comes in pre – weighed kits
Technical Specification :

• Pot life Approx. 45 minutes at +20° C
• Open time Approx. 50 minutes at +20° C
• Application temperature range 10° C to 32° C
• Ready for foot traffic After approx. 10-12 hours
• Ready for grouting After approx. 12 hours
• Loadable After approx. 24 hours
• Temperature resistance Completely cured -20° C to +80° C
• Density 1.40 kg/l mixed material