A two component Pu based floor coating. It is formulated for hard wearing, abrasion resistant, chemical resistant floor with improved cleanability. A Non-slip surface can be produced by incorporation of aggregates between the coats.
D+ PREPO is a general service coating designed for use, whenever high solids, corrosion resistant, gloss coating is required. It is used to provide a light to medium duty, easy to clean, Chemical resistant floor coating. Some application areas are:
| Properties | ||
|---|---|---|
|
Pot Life @ 25°C |
30min |
|
|
Application |
Brush/Roller |
|
|
Drying Time |
||
|
Surface Dry |
4-6 hours |
|
|
Hard Dry |
Overnight |
|
|
Intercoat intervals |
12 hours |
|
|
Hardness, Shore D |
75-80 |
|
|
Recommended no. of coats |
2 minimum |
|
|
DFT Recommended |
200-250 microns/ kg per coat depending on porosity |
|
|
Mixing Ratio |
As supplied |
|
|
Pack size |
Pre weighed kits |
|
